Dot1X Timeout Server-Timeout - Cisco 300 Series Cli Manual

802. 1 X Commands
OL-32830-01 Command Line Interface Reference Guide
no dot1x timeout reauth-period
Parameters
•
reauth-period
attempts. (Range: 300-4294967295).
Default Configuration
3600
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The command is only applied to the 802.1x authentication method.
Example
switchxxxxxx(config)#
switchxxxxxx(config-if)#

2.22 dot1x timeout server-timeout

Use the dot1x timeout server-timeout Interface Configuration mode command to
set the time interval during which the device waits for a response from the
authentication server. Use the no form of this command to restore the default
configuration.
Syntax
dot1x timeout server-timeout
no dot1x timeout server-timeout
Parameters
•
server-timeout
which the device waits for a response from the authentication server.
(Range: 1–65535 seconds).
seconds
—Number of seconds between re-authentication
interface gi11
dot1x timeout reauth-period 5000
seconds
seconds
—Specifies the time interval in seconds during
2
68