Ethernet Configuration Commands
OL-32830-01 Command Line Interface Reference Guide
Example
The following example displays the status of all configured interfaces.
switchxxxxxx#
show interfaces status
Port
Type
Duplex Speed Neg
------ --------- ------ ----- -------- ----
gi11
1G-Copper Full
gi12
1G-Copper --
PO
Type
Duplex Speed
-----
-------
------ -----
Po1
1G
Full
18.20 show interfaces advertise
To display auto-negotiation advertisement information for all configured interfaces
or for a specific interface, use the show interfaces advertise Privileged EXEC
mode command.
Syntax
show interfaces advertise
Parameters
•
interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are displayed.
Flow
ctrl
1000
Disabled Off
--
--
--
Flow
Neg
control
------- ----
10000
Disabled Off
[interface-id | detailed
Link
Back
Mdix
State
Pressure Mode
------ -------- --
Up
Disabled Off
Down
--
--
Link
State
------
Up
]
18
406