Rmon Table-Size - Cisco 300 Series Cli Manual

41
805

41.7 rmon table-size

To configure the maximum size of RMON tables, use the rmon table-size Global
Configuration modecommand. To return to the default size, use the no form of this
command.
Syntax
{history entries | log entries
rmon table-size
{history | log}
no rmon table-size
Parameters
•
entries
history
(Range: 20–32767)
•
entries
log —Specifies the maximum number of log table entries. (Range:
20–32767)
Default Configuration
The default history table size is 270 entries.
The default log table size is 200 entries.
Command Mode
Global Configuration mode
User Guidelines
The configured table size takes effect after the device is rebooted.
Example
The following example configures the maximum size of RMON history tables to
100 entries.
switchxxxxxx(config)#
Remote Network Monitoring (RMON) Commands
—Specifies the maximum number of history table entries.
rmon table-size history 100
OL-32830-01 Command Line Interface Reference Guide
}