Write - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

The following example copies file1 to the Startup Configuration file. The username

and password used for SCP session authentication are: jeff and admin1. The IP

address of the server containing file1 is 102.1.2.2.

switchxxxxxx#

copy scp://jeff:admin1@102.1.2.2/file1 startup-config

10.2 write

Use the write Privileged EXEC mode command to save the running configuration

to the startup configuration file.

write [memory]

This command has no arguments or keywords.

Command Mode

Privileged EXEC mode

The following example shows how to overwrite the startup-config file with the

running-config file with the write command.

switchxxxxxx#

Overwrite file [startup-config] ?[Yes/press any key for no]....15-Sep-2010 11:27

:48 %COPY-I-FILECPY: Files Copy - source URL running-config destination URL

flash://startup-config

15-Sep-2010 11:27:50 %COPY-N-TRAP: The copy operation was completed successfully

Copy succeeded

Configuration and Image File Commands

OL-32830-01 Command Line Interface Reference Guide