Cisco 300 Series Cli Manual page 653

30
653
To remove LLDP MED network policy, use the no form of this command.
Syntax
lldp med network-policy
untagged}] [up priority] [dscp value]
no lldp med network-policy
Parameters
•
number—Network policy sequential number. The range is 1-32.
•
application—The name or the number of the primary function of the
application defined for this network policy. Available application names are:
-
voice
-
voice-signaling
-
guest-voice
-
guest-voice-signaling
-
softphone-voice
-
video-conferencing
-
streaming-video
-
video-signaling.
•
vlan vlan-id —(Optional) VLAN identifier for the application.
•
vlan-type—(Optional) Specifies if the application is using a tagged or an
untagged VLAN.
•
priority
up —(Optional) User Priority (Layer 2 priority) to be used for the
specified application.
•
value
dscp —(Optional) DSCP value to be used for the specified application.
Default Configuration
No network policy is defined.
Command Mode
Global Configuration mode
Link Layer Discovery Protocol (LLDP) Commands
number application [vlan vlan-id] [vlan-type {tagged |
number
OL-32830-01 Command Line Interface Reference Guide