Interface Range; Shutdown - Cisco 300 Series Cli Manual

18
Ethernet Configuration Commands

18.2 interface range

To execute a command on multiple ports at the same time, use the interface range
command.
Syntax
interface-id-list
interface range
Parameters
interface-id-list—Specify list of interface IDs. The interface ID can be one of the
following types: Ethernet port, VLAN, or port-channel
Default Configuration
None
Command Mode
Interface (Ethernet, Port Channel, VLAN) Configuration mode
User Guidelines
Commands under the interface range context are executed independently on
each interface in the range. If the command returns an error on one of the
interfaces, it does not stop the execution of the command on other interfaces.
Example
switchxxxxxx(config)# interface range gi11-4
switchxxxxxx(config-if-range)#

18.3 shutdown

To disable an interface, use the shutdown Interface Configuration mode command.
To restart a disabled interface, use the no form of this command.
Syntax
shutdown
no shutdown
389 OL-32830-01 Command Line Interface Reference Guide