Clear Ip Dhcp Snooping Database - Cisco 300 Series Cli Manual

13
DHCP Snooping Commands
The entry would not be added to the configuration files. The entry would be
displayed in the show commands as a "DHCP Snooping" entry.
An entry added by this command can override the existed dynamic entry.
An entry added by this command cannot override the existed static entry added
by the ip source-guard binding command.
The entry is displayed in the show commands as a DHCP Snooping entry.
Use the no ip dhcp snooping binding command to delete manually a dynamic
entry from the DHCP database.
A dynamic temporary entries for which the IP address is 0.0.0.0 cannot be deleted.
Example
The following example adds a binding entry to the DHCP Snooping binding
database.
switchxxxxxx# 0060.704C.73FF 23 176.10.1.1 gi14
ip dhcp snooping binding
900
expiry

13.9 clear ip dhcp snooping database

Use the clear ip dhcp snooping database Privileged EXEC mode command to
clear the DHCP Snooping binding database.
Syntax
clear ip dhcp snooping database
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
The following example clears the DHCP Snooping binding database.
317 OL-32830-01 Command Line Interface Reference Guide