Show Ip Igmp Snooping Interface - Cisco 300 Series Cli Manual

21
447
Example
The following example shows sample output:
switchxxxxxx# show ip igmp snooping groups vlan 1
switchxxxxxx#
show ip igmp snooping groups
Vlan Group Address
---- ---------------
1 239.255.255.250

21.17 show ip igmp snooping interface

To display the IGMP snooping configuration for a specific VLAN, use the show ip
igmp snooping interface command in User EXEC mode.
Syntax
show ip igmp snooping interface
Parameters
•
vlan-id
—Specifies the VLAN ID.
Command Mode
User EXEC mode
Example
The following example displays the IGMP snooping configuration for VLAN 1000
switchxxxxxx# show ip igmp snooping interface 1000
IGMP Snooping is globally enabled
IGMP Snooping Querier is globally enabled
VLAN 1000
IGMP Snooping is enabled
IGMP snooping last immediate leave: enable
Automatic learning of Multicast router ports is enabled
Source Address Include Ports
---------------- ------------
* gi11
vlan-id
OL-32830-01 Command Line Interface Reference Guide
IGMP Snooping Commands
Exclude Ports Comp-Mode
-------- ---------
v2