Ip Ssh Password-Auth - Cisco 300 Series Cli Manual

52
1007
no ip ssh port
Parameters
•
port-number
—Specifies the TCP port number to be used by the SSH
server. (Range: 1–65535).
Default Configuration
The default TCP port number is 22.
Command Mode
Global Configuration mode
Example
The following example specifies that TCP port number 8080 is used by the SSH
server.
switchxxxxxx(config)#

52.4 ip ssh password-auth

Use the ip ssh password-auth Global Configuration mode command to enable
password authentication of incoming SSH sessions.
Use the no form of this command to disable this function.
Syntax
ip ssh password-auth
no ip ssh password-auth
Default Configuration
Password authentication of incoming SSH sessions is disabled.
Command Mode
Global Configuration mode
Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
8080
ip ssh port
OL-32830-01 Command Line Interface Reference Guide