Dot1X - Cisco 300 Series Cli Manual

802. 1 X Commands
OL-32830-01 Command Line Interface Reference Guide
2.14 dot1x page customization
Use the dot1x page customization command in Global Configuration mode
command to enter the Web-Based Page Customization Configuration mode,
Syntax
dot1x page customization
Parameters
N/A
Default Configuration
No user customization.
Command Mode
Web-Based Page Customization Configuration mode
User Guidelines
The command should not be entered or edited manually (unless when using
copy-paste). It is a part of the configuration file produced by the switch.
A user must customize the web-based authentication pages by using the browser
Interface.
Example
The following example shows part of a web-based page customization
configuration:
switchxxxxxx(config)#
switchxxxxxx(config-web-page)#
switchxxxxxx(config-web-page)#
switchxxxxxx(config-web-page)#
dot1x page customization
data 1feabcde
data 17645874
exit
2
60