Speed - Cisco 300 Series Cli Manual

18
393
no description
Parameters
string—Specifies a comment or a description of the port to assist the user.
(Length: 1–64 characters).
Default Configuration
The interface does not have a description.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example adds the description 'SW#3' to gi 1 4.
switchxxxxxx(config)#
switchxxxxxx(config-if)#

18.6 speed

To configure the speed of a given Ethernet interface when not using
auto-negotiation, use the speed Interface (Ethernet, Port Channel) Configuration
mode command. To restore the default configuration, use the no form of this
command.
Syntax
{10 | 100 | 1000 }
speed
no speed
Parameters
•
10—Forces10 Mbps operation
•
100—Forces 100 Mbps operation
•
1000—Forces 1000 Mbps operation
interface gi14
description SW#3
OL-32830-01 Command Line Interface Reference Guide
Ethernet Configuration Commands