Ip Igmp Snooping Map Cpe Vlan - Cisco 300 Series Cli Manual

21
439
Command Mode
Global Configuration mode
User Guidelines
Use this command to define the Multicast transmissions on a Multicast-TV VLAN.
The configuration is only relevant for an Access port that is a member in the
configured VLAN as a Multicast-TV VLAN.
If an IGMP message is received on such an Access port, it is associated with the
Multicast-TV VLAN only if it is for one of the Multicast IP addresses that are
associated with the Multicast-TV VLAN.
Up to 256 VLANs can be configured.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 multicast-tv 239.2.2.2 count
3

21.8 ip igmp snooping map cpe vlan

To map CPE VLANs to Multicast-TV VLANs, use the ip igmp snooping map cpe
vlan command in Global Configuration mode. To return to the default, use the no
form of this command.
Syntax
ip igmp snooping map cpe vlan
no ip igmp snooping map cpe vlan
Parameters
•
cpe-vlan-id
—Specifies the CPE VLAN ID.
•
vlan-id—Specifies the Multicast-TV VLAN ID.
Default Configuration
No mapping exists.
Command Mode
Global Configuration mode
cpe-vlan-id
multicast-tv vlan
vlan-id
OL-32830-01 Command Line Interface Reference Guide
IGMP Snooping Commands
vlan-id