Cdp Timer - Cisco 300 Series Cli Manual

CDP Commands
OL-32830-01 Command Line Interface Reference Guide
Default Configuration
MAC address is selected by default.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)#
8.12

cdp timer

The cdp timer Global Configuration mode command specifies how often CDP
packets are transmitted. The no format of this command returns to default.
Syntax
cdp timer seconds
no cdp timer
Parameters
•
seconds —Value of the Transmission Timer in seconds. Range: 5-254
seconds.
Default Configuration
60 seconds.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)#
cdp device-id format serial-number
cdp timer 100
8
210