Qos Map Policed-Dscp - Cisco 300 Series Cli Manual

Quality of Service (QoS) Commands
OL-32830-01 Command Line Interface Reference Guide
Example 5—This is an example of the output from show qos interface policer
switchxxxxxx(config)#
gi11
Ethernet
Class map: A
Policer type: aggregate
Commited rate: 192000 bps
Commited burst: 9600 bytes
Exceed-action: policed-dscp-transmit
Class map: B
Policer type: single
Commited rate: 192000 bps
Commited burst: 9600 bytes
Exceed-action: drop
Class map: C
Policer type: none
Example 6—This is an example of the output from show qos interface rate-limit
switchxxxxxx(config)#
Port rate-limit [kbps] Burst [Bytes]
---------- ----------------- -------------
1 3000
gi1
switchxxxxxx(config)#
Port rate-limit [kbps]
----- -----------------
gi11 1000

39.27 qos map policed-dscp

Use the qos map policed-dscp Global Configuration mode command to configure
the policed-DSCP map for remarking purposes. Use the no form of this command
to restore the default configuration.
show qos interface policer
show qos interface rate-limit
3000
show qos interface rate-limit
Burst [Bytes]
--------------
512
gi11
1
gi1
gi11
39
774