Periodic - Cisco 300 Series Cli Manual

Clock Commands
OL-32830-01 Command Line Interface Reference Guide
Default Configuration
Coordinated Universal Time (UTC) or Greenwich Mean Time (GMT), which is the
same:
•
Offsets are 0.
•
Acronym is empty.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display
purposes and when the time is manually set.
Example
switchxxxxxx(config)#
9.7

periodic

To specify a recurring (weekly) time range for functions that support the
time-range feature, use the periodic command in Time-range Configuration mode.
To restore the default configuration, use the no form of this command.
Syntax
day-of-the-week hh:mm to day-of-the-week hh:mm
periodic
day-of-the-week hh:mm to day-of-the-week hh:mm
no periodic
hh:mm to hh:mm day-of-the-week1
periodic list
day-of-the-week7
]
hh:mm to hh:mm day-of-the-week1
no periodic list
day-of-the-week7
]
hh:mm to hh:mm all
periodic list
hh:mm to hh:mm all
no periodic list
clock timezone abc +2 minutes 32
day-of-the-week2...
[
day-of-the-week2...
[
9
234