Show Errdisable Recovery - Cisco 300 Series Cli Manual

18
413

18.24 show errdisable recovery

To display the Err-Disable configuration of the device, use the show errdisable
recovery Privileged EXEC mode command.
Syntax
show errdisable recovery
Parameters
This command has no arguments or keywords
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example displays the Err-Disable configuration.
switchxxxxxx# show errdisable recovery
Timer interval: 300 Seconds
Reason
---------------------- ------------------
port-security
dot1x-src-address
acl-deny
stp-bpdu-guard
stp-loopback-guard
loop-detection
udld
.
Automatic Recovery
Disable
Disable
Enable
Disable
Disable
Disable
Disable
OL-32830-01 Command Line Interface Reference Guide
Ethernet Configuration Commands