Show Environment - Cisco 300 Series Cli Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide
Default Usage
None
Command Mode
Privileged EXEC mode
User Guidelines
Use the show cpu-utilization command to enable measuring CPU utilization.
Example
The following example displays CPU utilization information.
switchxxxxxx> show cpu utilization
CPU utilization service is on.
CPU utilization
--------------------------------------------------
five seconds: 5%; one minute: 3%; five minutes: 3%

50.10 show environment

To display environment information, use the show environment EXEC mode
command.
Syntax
show environment {all | fan | temperature {status}
Parameters
•
all — Displays the fan and temperature general status
•
—
fan Displays the fan status
•
temperature status—Displays the temperature status
Command Mode
User EXEC mode
}
50
980