Aaa Accounting Dot1X - Cisco 300 Series Cli Manual

3
103
The following table describes the supported TACACS+ accounting arguments
and in which messages they are sent by the switch.
Name Description
task_id A unique accounting session
identifier.
user username that is entered for
login authentication
rem-addr IP address.of the user
elapsed-time Indicates how long the user
was logged in.
reason Reports why the session was
terminated.
Example
switchxxxxxx(config)#
3.13

aaa accounting dot1x

To enable accounting of 802.1x sessions, use the aaa accounting dot1x Global
Configuration mode command. Use the no form of this command to disable
accounting.
Syntax
aaa accounting dot1x start-stop group radius
no aaa accounting dot1x start-stop group radius
Parameters
N/A
Default Configuration
Disabled
Command Mode
Global Configuration mode
Authentication, Authorization and Accounting (AAA) Commands
aaa accounting login start-stop group radius
OL-32830-01 Command Line Interface Reference Guide
Start Stop Message
Message
Yes Yes
Yes Yes
Yes Yes
No Yes
No Yes