Show Ipv6 First Hop Security Active Policies - Cisco 300 Series Cli Manual

IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide
25.67 show ipv6 first hop security active
policies
To display information about the policies applied to the port and to the VLAN, use
the show ipv6 first hop security active policies command in privileged EXEC
mode.
Syntax
show ipv6 first hop security active policies interface
Parameters
•
interface-id
interface
•
vlan-id
vlan —VLAN Identifier.
Command Mode
Privileged EXEC mode
User Guidelines
This command displays policies applied to frames arriving on given port and
belonging to the given VLAN. The policies are calculated automatically by using
the policies attached to the port, VLAN, and the global configuration
Example
The following example displays the active attached policies on
100:
switchxxxxxx#
show ipv6 first hop security active policies interface gi11 vlan
100
IPv6 First Hop Security is enabled on VLANs:1-4,6,7,100-120
IPv6 DHCP Guard is enabled on VLANs:1-4
IPv6 ND Inspection is enabled on VLANs:1-4,6,7,100-120
IPv6 Neighbor Binding Integrity is enabled on VLANs:1-4,6,7,100-120
IPv6 RA Guard is enabled on VLANs:1-4,6,7,100-120
IPv6 Source Guard is enabled on VLANs:1-3,7,100-112
gi11, VLAN 100
—Port Identifier (Ethernet port or port channel).
interface-id vlan-id
vlan
1 and VLAN
gi1
25
574