Macro Auto Processing Type - Cisco 300 Series Cli Manual

Smartport Commands
OL-32830-01 Command Line Interface Reference Guide
Example
To enable LLDP globally:
switchxxxxxx(config)#

44.9 macro auto processing type

The macro auto processing type Global Configuration mode command enables or
disables automatic detection of devices of given type. The no format of the
command returns to the default.
Syntax
macro auto processing type
no macro auto processing type
Parameters
•
smartport-type
ip_phone_desktop, switch, router or wireless access point (ap)).
Default Configuration
By default, auto detection of ip_phone, ip_phone_desktop, switch, and wireless
access point (ap) is enabled.
Command Mode
Global Configuration mode
Example
In this example, automatic detection of wireless access points (ap) is enabled.
switchxxxxxx(config)#
host
ip_phone
ip_phone_desktop
macro auto processing lldp
smartport-type
smartport-type
—Smartport type (range: host, ip_phone,
macro auto processing type ?
set type to host
set type to ip_phone
set type to ip_phone_desktop
{enabled | disabled}
44
844