Power Inline Legacy Support Disable; Power Inline Powered-Device - Cisco 300 Series Cli Manual

Power over Ethernet (PoE) Commands
OL-32830-01 Command Line Interface Reference Guide

36.3 power inline legacy support disable

To disable the legacy PDs support, use the power inline legacy support disable
Global Configuration mode command. To enable the legacy support, use the no
form of this command.
Syntax
power inline legacy support disable
no power inline legacy support disable
Parameters
N/A.
Default Configuration
Legacy support is enabled.
Command Mode
Global Configuration mode
Example
The following example disables legacy PDs support.
switchxxxxxx(config)# power legacy support disable

36.4 power inline powered-device

To add a description of the powered device type, use the power inline
powered-device Interface Configuration mode command. To remove the
description, use the no form of this command.
Syntax
power inline powered-device
no power inline powered-device
pd-type
36
726