Show Cpu Input Rate; Show Cpu Utilization - Cisco 300 Series Cli Manual

50
System Management Commands
@
ssd-control-start

50.8 show cpu input rate

To display the rate of input frames to the CPU in packets per seconds (pps), use
the show cpu input rate EXEC mode command.
Syntax
show cpu input rate
Parameters
This command has no arguments or keywords.
Command Mode
User EXEC mode
Example
The following example displays CPU input rate information.
switchxxxxxx> show cpu input rate
Input Rate to CPU is 1030 pps.

50.9 show cpu utilization

To display information about CPU utilization, use the show cpu utilization
Privileged EXEC mode command.
Syntax
show cpu utilization
Parameters
This command has no arguments or keywords.
979 OL-32830-01 Command Line Interface Reference Guide