Tacacs-Server Timeout - Cisco 300 Series Cli Manual

51
1001
Syntax
key-string
tacacs-server key
encrypted tacacs-server key
no tacacs-server key
Parameters
•
key-string
—Specifies the authentication and encryption key for all
TACACS+ communications between the device and the TACACS+ server.
This key must match the encryption used on the TACACS+ daemon.
(Length: 0–128 characters)
•
encrypted-key-string
format.
Default Configuration
The default key is an empty string.
Command Mode
Global Configuration mode
Example
The following example sets Enterprise as the authentication key for all TACACS+
servers.
switchxxxxxx(config)#

51.5 tacacs-server timeout

To set the interval during which the device waits for a TACACS+ server to reply,
use the tacacs-server timeout Global Configuration mode command. To restore
the default configuration, use the no form of this command.
Syntax
tacacs-server timeout
no tacacs-server timeout
encrypted-key-string
—Same as key-string, but the key is in encrypted
tacacs-server key enterprise
timeout
OL-32830-01 Command Line Interface Reference Guide
TACACS+ Commands