39
Quality of Service (QoS) Commands
Parameters
default-cos—Specifies the default CoS value (VPT value) of the port. If the port is
trusted and the packet is untagged, then the default CoS value become the CoS
value. (Range: 0–7)
Default Configuration
The default CoS value of a port is 0.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
Use the default CoS value to assign a CoS value to all untagged packets entering
the interface.
Example
The following example defines the port
1 default CoS value as 3.
gi1
switchxxxxxx(config)# interface gi11
3
switchxxxxxx(config-if)#
qos cos
39.32 qos dscp-mutation
Use the qos dscp-mutation Global Configuration mode command to apply the
DSCP Mutation map to system DSCP trusted ports. Use the no form of this
command to restore the trusted port with no DSCP mutation.
Syntax
qos dscp-mutation
no qos dscp-mutation
Parameters
N/A
779
OL-32830-01 Command Line Interface Reference Guide