Ipv6 Commands; Clear Ipv6 Neighbors; Ipv6 Address - Cisco 300 Series Cli Manual

IPv6 Commands

OL-32830-01 Command Line Interface Reference Guide
27.0
27.1

clear ipv6 neighbors

Use the clear ipv6 neighbors command in privileged EXEC mode to delete all
entries in the IPv6 neighbor discovery cache, except static entries.
Syntax
clear ipv6 neighbors
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
Example
The following example deletes all entries, except static entries, in the neighbor
discovery cache:
switchxxxxxx# clear ipv6 neighbors
27.2

ipv6 address

Use the ipv6 address command in Interface Configuration mode to configure a
global unicast IPv6 address based on an IPv6 general prefix and enable IPv6
processing on an interface. To remove the address from the interface, use the no
form of this command.
27
606