Service Mirror-Configuration - Cisco 300 Series Cli Manual

Configuration and Image File Commands
OL-32830-01 Command Line Interface Reference Guide
Example
The following example displays the active system image file that was loaded by
the device at startup and the system image file that will be loaded after rebooting
the switch:
switchxxxxxx# show bootvar
Image Filename Version
----- --------- ---------
1 image-1 1.1.0.73
2 image-2 1.1.0.73
"*" designates that the image was selected for the next boot

10.11 service mirror-configuration

Use the service mirror-configuration Global Configuration mode command to
enable the mirror-configuration service. Use no service mirror-configuration
command to disable the service.
Syntax
service mirror-configuration
no service mirror-configuration
Parameters
This command has no arguments or keywords.
Default Configuration
The default configuration is mirror-configuration service enabled.
Command Mode
Global Configuration mode
Date
---------------------
19-Jun-2011 18:10:49
19-Jun-2011 18:10:49
10
Status
-----------
Not active*
Active
268