Show Storm-Control - Cisco 300 Series Cli Manual

18
Ethernet Configuration Commands
Parameters
unknown-unicast—(Optional) Specifies also the count of unknown Unicast
packets.
Default Configuration
Disabled
Command Mode
Interface (Ethernet) Configuration mode
Example
switchxxxxxx(config)#
interface gi11
switchxxxxxx(config-if)# storm-control include-multicast

18.29 show storm-control

To display the configuration of storm control for a port, use the show storm-control
Privileged EXEC mode command.
Syntax
[interface-id]
show storm-control
Parameters
interface-id—(Optional) Specifies the Ethernet port.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode
417 OL-32830-01 Command Line Interface Reference Guide