Show Ipv6 Mld Snooping Mrouter - Cisco 300 Series Cli Manual

34
717
Example
The following example displays the MLD snooping configuration for VLAN 1000.
switchxxxxxx# show ipv6 mld snooping interface 1000
MLD Snooping is globally enabled
MLD Snooping Querier is globally enabled
VLAN 1000
MLD Snooping is enabled
MLD snooping last immediate leave: enable
Automatic learning of multicast router ports is enabled
MLD Snooping Querier is enabled
MLD Snooping Querier operation state: is running
MLD Snooping Querier version: 2
MLD Snooping Querier election is enabled
MLD snooping robustness: admin 2
MLD snooping query interval: admin 125 sec oper 125 sec
MLD snooping query maximum response: admin 10 sec oper 10 sec
MLD snooping last member query counter: admin 2 oper 2
MLD snooping last member query interval: admin 1000 msec oper 500 msec
Groups that are in MLD version 1 compatibility mode:
FF12::3, FF12::8

34.14 show ipv6 mld snooping mrouter

To display information on dynamically learned Multicast router interfaces for all
VLANs or for a specific VLAN, use the show ipv6 mld snooping mrouter EXEC
mode command in User EXEC mode.
Syntax
show ipv6 mld snooping mrouter [interface
Parameters
•
vlan-id
interface
oper 2
—(Optional) Specifies the VLAN ID.
OL-32830-01 Command Line Interface Reference Guide
MLD Snooping Commands
vlan-id
]