Errdisable Recovery Reset - Cisco 300 Series Cli Manual

18
403

18.17 errdisable recovery reset

To reactivate one or more interfaces that were shut down by a given application,
use the errdisable recovery reset Privileged EXEC mode command. A single
interface, multiple interfaces or all interfaces can be specified.
Syntax
errdisable recovery reset {all | port-security | dot1x-src-address | acl-deny
| s tp-bpdu-guard | loopback-detection | | udld
interface-id
| interface
Parameters
•
all—Reactivate all interfaces regardless of their state.
•
port-security—Reactivate all interfaces in the Port Security Err-Disable
state.
•
dot1x-src-address—Reactivate all interfaces in the 802.1x Err-Disable state.
•
acl-deny—Reactivate all interfaces in the ACL Deny Err-Disable state.
•
stp-bpdu-guard—Reactivate all interfaces in the STP BPDU Guard
Err-Disable state.
•
| l oopback-detection—Reactivate all interfaces in the Loopback Detection
Err-Disable state.
•
udld—Reactivate all interfaces in the UDLD Shutdown state.
•
interface-id—
interface
active, but were shut down by the system.
Default Configuration
None.
Command Mode
Privileged EXEC mode
Examples
—
Example 1 The following example reactivates interface gi 1 1:
}
Reactivate interfaces that were configured to be
OL-32830-01 Command Line Interface Reference Guide
Ethernet Configuration Commands