Show Boot - Cisco 300 Series Cli Manual

6
191
•
extension
—The SCP file extension. When no value is specified, 'scp' is used.
(Range: 1-16 characters)
Default Configuration
Enabled by default with the auto option.
Command Mode
Global Configuration mode
User Guidelines
The TFTP or SCP protocol is used to download/upload an image file.
Examples
Example 1—The following example specifies the auto mode and specifies "scon"
as the SCP extension:
switchxxxxxx# boot host auto-update auto scon
Example 2—The following example specifies the auto mode and does not provide
an SCP extension. In this case "scp" is used.
switchxxxxxx#
boot host auto-update auto
Example 3—The following example specifies that only the SCP protocol will be
used:
switchxxxxxx#
boot host auto-update scp
6.3

show boot

Use the show boot Privilege EXEC mode command to show the status of the IP
DHCP Auto Config process.
Syntax
show boot
Auto-Update and Auto-Configuration
OL-32830-01 Command Line Interface Reference Guide