Show Ip Dhcp Binding - Cisco 300 Series Cli Manual

12
299
Lease The lease expiration date of the host IP address.
expiration
Type The manner in which the IP address was assigned
to the host.

12.21 show ip dhcp binding

To display the specific address binding or all the address bindings on the DHCP
server, use the show ip dhcp binding command in User EXEC mode.
Syntax
show ip dhcp binding [
Parameters
•
ip-address
-(Optional) Specifies the IP address.
Command Mode
User EXEC mode
Examples
The following examples display the DHCP server binding address parameters.
switchxxxxxx#
show ip dhcp binding
DHCP server enabled
The number of used (all types) entries is 6
The number of pre-allocated entries is 1
The number of allocated entries is 1
The number of expired entries is 1
The number of declined entries is 2
The number of static entries is 1
The number of dynamic entries is 2
The number of automatic entries is 1
IP address Hardware Address
ip-address
]
Lease Expiration Type
OL-32830-01 Command Line Interface Reference Guide
DHCP Server Commands
State