Show Ipv6 First Hop Security Error Counters; Show Ipv6 First Hop Security Policy - Cisco 300 Series Cli Manual

25
IPv6 First Hop Security
25.70 show ipv6 first hop security error
counters
To display global error counters, use the show ipv6 first hop security error
counters command in privileged EXEC mode.
Syntax

show ipv6 first hop security error counters

Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
This command displays global error counters.
Examples
Example 1—The following examples displays global error counters:
switchxxxxxx#
show ipv6 first hop security error counters
Neighbor Binding Table Overflow counter: 0
Neighbor Prefix Table Overflow counter: 0
TCAM Overflow counter: 0

25.71 show ipv6 first hop security policy

To display IPv6 First Hop Security policies on all ports configured with the IPv6
First Hop Security feature, use the show ipv6 first hop security policy command in
privileged EXEC mode.
Syntax
policy-name
show ipv6 first hop security policy [ | active]
579 OL-32830-01 Command Line Interface Reference Guide