Show Lldp Neighbors - Cisco 300 Series Cli Manual

Link Layer Discovery Protocol (LLDP) Commands
OL-32830-01 Command Line Interface Reference Guide
gi13 No
Example 2 - The following example displays the LLDP MED configuration for
switchxxxxxx# show lldp med configuration gi11
Port Capabilities
------- -------------- ---------------- --------- ----------
gi11 Yes
Network policies:
Location:
Civic-address: 61:62:63:64:65:66

30.27 show lldp neighbors

To display information about neighboring devices discovered using LLDP, use the
show lldp neighbors Privileged EXEC mode command. The information can be
displayed for all ports or for a specific port.
Syntax
show lldp neighbors
Parameters
interface-id—(Optional) Specifies a port ID.
Default Configuration
If no port ID is entered, the command displays information for all ports.
Command Mode
Privileged EXEC mode
User Guidelines
A TLV value that cannot be displayed as an ASCII string is displayed as an
hexadecimal string.
No No
Network Policy Location
Yes Yes
[interface-id]
Enabled No
Notifications Inventory
--------
Enabled Yes
30
1.
gi1
672