Enable Authentication - Cisco 300 Series Cli Manual

3
91
Parameters
•
default—Uses the default list created with the aaa authentication login
command.
•
list-name
—Uses the specified list created with the aaa authentication login
command.
Default Configuration
default
Command Mode
Line Configuration Mode
Examples
Example 1 - The following example specifies the login authentication method as
the default method for a console session.
switchxxxxxx(config)#
switchxxxxxx(config-line)#
Example
Example 2 - The following example sets the authentication login methods for the
console as a list of methods.
switchxxxxxx(config)#
switchxxxxxx(config)#
switchxxxxxx(config-line)#
3.4

enable authentication

The enable authentication Line Configuration mode command specifies the
authentication method for accessing a higher privilege level from a remote Telnet
or console. Use the no form of this command to restore the default authentication
method.
Syntax
enable authentication {default |
Authentication, Authorization and Accounting (AAA) Commands
line console
login authentication default
aaa authentication login authen-list radius local none
line console
login authentication authen-list
list-name}
OL-32830-01 Command Line Interface Reference Guide