Data - Cisco 300 Series Cli Manual

802. 1 X Commands
OL-32830-01 Command Line Interface Reference Guide
2.4

data

To specify web-based page customization, the data command in Web-Based
Page Customization Configuration mode is used.
Syntax
value
data
Parameters
•
value
—String of hexadecimal digit characters up to 320 characters.
Default Configuration
No user customization.
Command Mode
Web-Based Page Customization Configuration mode
User Guidelines
The command should not be entered or edited manually (unless using
copy-paste). It is a part of the configuration file produced by the switch.
A user can only customize the web-based authentication pages by using the WEB
interface.
Examples
—The following example shows a partial web-based page
Example 1
customization configuration:
switchxxxxxx(config)#
switchxxxxxx(config-web-page)#
switchxxxxxx(config-web-page)#
switchxxxxxx(config-web-page)#
Example 2
—The following example shows how Web-Based Page customization is displayed when
running the show running-config command:
dot1x page customization
data 1feabcde
data 17645874
exit
2
48