36
731
Command Mode
Global Configuration mode
User Guidelines
Changing the PoE limit mode of the system will turn the power OFF and ON for all
PoE ports.
Example
The following example sets the power limit to class.
switchxxxxxx(config)#
"Changing the PoE limit mode of the system will turn the power OFF and ON for all
PoE ports. Are you sure? [y/n]"
36.10 show power inline
To display information about the inline power for all interfaces or for a specific
interface, use the show power inline privileged EXEC mode command.
Syntax
interface-id
show power inline [
Parameters
•
interface-id—Specifies an interface ID. The interface ID must be an Ethernet
port.
Default Configuration
Show information for all ports.
Command Mode
Privileged EXEC mode
power inline limit-mode class
]
OL-32830-01 Command Line Interface Reference Guide
Power over Ethernet (PoE) Commands