Cisco 300 Series Cli Manual page 673

30
673
Examples
Example 1 - The following example displays information about neighboring
devices discovered using LLDP on all ports on which LLDP is enabled and who are
up.
Location information, if it exists, is also displayed.
switchxxxxxx# show lldp neighbors
System capability legend:
B - Bridge; R - Router; W - Wlan Access Point; T - telephone;
D - DOCSIS Cable Device; H - Host; r - Repeater;
TP - Two Ports MAC Relay; S - S-VLAN; C - C-VLAN; O - Other
Port Device ID
----- ---------------
gi11 00:00:00:11:11:11
gi11 00:00:00:11:11:11
gi12 00:00:26:08:13:24
gi13 00:00:26:08:13:24
Example 2 - The following example displays information about neighboring
devices discovered using LLDP on port 1.
switchxxxxxx# show lldp neighbors gi11
Device ID: 00:00:00:11:11:11
Port ID: gi11
System Name: ts-7800-2
Capabilities: B
System description:
Port description:
Management address: 172.16.1.1
Time To Live: 90 seconds
802.3 MAC/PHY Configuration/Status
Auto-negotiation support: Supported.
Link Layer Discovery Protocol (LLDP) Commands
Port ID System Name Capabilities TTL
-------- ----------
gi11 ts-7800-2
gi11 ts-7800-2
gi13 ts-7900-1
gi12 ts-7900-2
OL-32830-01 Command Line Interface Reference Guide
----------- ----
B 90
B 90
B, R 90
W 90