Ipv6 Prefix List Commands; Clear Ipv6 Prefix-List - Cisco 300 Series Cli Manual

IPv6 Prefix List Commands

OL-32830-01 Command Line Interface Reference Guide
26.0
26.1

clear ipv6 prefix-list

Use the clear ipv6 prefix-list command in privileged EXEC mode to reset the hit
count of the IPv6 prefix list entries.
Syntax
clear ipv6 prefix-list [
Parameters
•
prefix-list-name
be cleared.
•
ipv6-prefix
—The IPv6 network from which the hit count is to be cleared.
This argument must be in the form documented in RFC 4293 where the
address is specified in hexadecimal using 16-bit values between colons.
•
prefix-length
/ —The length of the IPv6 prefix. A decimal value that indicates
how many of the high-order contiguous bits of the address comprise the
prefix (the network portion of the address). A slash mark must precede the
decimal value.
Default Configuration
The hit count is automatically cleared for all IPv6 prefix lists.
Command Mode
Privileged EXEC mode
User Guidelines
The hit count is a value indicating the number of matches to a specific prefix list
entry.
prefix-list-name ipv6-prefix
[
—The name of the prefix list from which the hit count is to
26
prefix-length
/ ]]
597