Show Ports Leds Configuration; Show Users - Cisco 300 Series Cli Manual

50
System Management Commands

50.23 show ports leds configuration

To display whether the LEDs of the ports are enabled or disabled, use the show
port leds configuration EXEC mode command.
Syntax
show ports leds configuration
Parameters
This command has no arguments or keywords.
Command Mode
User EXEC mode
Examples
Example 1: The following example displays the status of the port's LEDs when they
are turned on.
switchxxxxxx> show ports leds configuration
Port leds are not disabled
x
Example 2: The following example displays the status of the port LEDs when they
are turned off.
switchxxxxxx> show port leds configuration
Port leds are disabled

50.24 show users

To display information about the active users, use the show users EXEC mode
command.
Syntax
show users
993 OL-32830-01 Command Line Interface Reference Guide