Show Tech-Support - Cisco 300 Series Cli Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide
Syntax
show services tcp-udp
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
User Guidelines
The output does not show sessions where the device is a TCP/UDP client.
Examples
switchxxxxxx> show services tcp-udp
Type Local IP Address Remote IP address
---------------------- ------------------- ------------- -----------
TCP All:22
TCP All:23
TCP All:80
TCP All:443
TCP 172.16.1.1:23 172.16.1.18:8789
TCP6 All-23
TCP6 fe80::200:b0ff:fe00:0-23
fe80::200:b0ff:fe00:0-8999
UDP All:161
UDP6A ll-161

50.19 show tech-support

To display system and configuration information that can be provided to the
Technical Assistance Center when reporting a problem, use the show
tech-support EXEC mode command.
Service Name State
SSH LISTEN
Telnet LISTEN
HTTP LISTEN
HTTPS LISTEN
Telnet ESTABLISHED
Telnet LISTEN
Telnet
ESTABLISHED
SNMP
SNMP
50
988