Service Cpu-Input-Rate - Cisco 300 Series Cli Manual

50
System Management Commands
Parameters
connection—(Optional) Specifies the connection number. (Range: 1-4
connections.)
Default Configuration
The default connection number is that of the most recent connection.
Command Mode
Privileged EXEC mode
Example
The following command switches to open Telnet session number 1.
switchxxxxxx> resume
1

50.5 service cpu-input-rate

The show cpu input rate Global Configuration mode command enables counting
the rate of input frames to the CPU in packets per seconds (pps).
Syntax
service cpu-input-rate
Parameters
This command has no arguments or keywords.
Command Mode
Global Configuration mode
Example
The following example displays CPU input rate information.
switchxxxxxx(config)#
service cpu-input-rate
975 OL-32830-01 Command Line Interface Reference Guide