Qos Statistics Queues - Cisco 300 Series Cli Manual

39
785
Command Mode
Global Configuration mode
Example
The following example enables counting in-profile and out-of-profile on the
interface.
switchxxxxxx(config)# qos statistics aggregate-policer

39.38 qos statistics queues

Use the qos statistics queues Global Configuration mode command to enable
QoS statistics for output queues. Use the no form of this command to disable QoS
statistics for output queues.
Syntax
qos statistics queues
no qos statistics queues
Parameters
•
set—Specifies the counter set number.
•
interface—Specifies the Ethernet port.
•
queue—Specifies the output queue number.
•
dp—Specifies the drop precedence. The available values are: high, low.
Default Configuration
Set 1: All interfaces, all queues, high DP.
Set 2: All interfaces, all queues, low DP.
Command Mode
Global Configuration mode
set queue
{ | all} {dp | all} {interface | all}
set
OL-32830-01 Command Line Interface Reference Guide
Quality of Service (QoS) Commands
policer1