Show Tacacs - Cisco 300 Series Cli Manual

TACACS+ Commands
OL-32830-01 Command Line Interface Reference Guide
Parameters
•
timeout
—Specifies the timeout value in seconds. (Range: 1-30).
Default Configuration
The default timeout value is 5 seconds.
Command Mode
Global Configuration mode
Example
The following example sets the timeout value to 30 for all TACACS+ servers.
switchxxxxxx(config)#

51.6 show tacacs

To display configuration and statistical information for a TACACS+ server, use the
show tacacs Privileged EXEC mode command.
Syntax
ip-address
show tacacs [
Parameters
•
ip-address
—Specifies the TACACS+ server name, IPv4 or IPv6 address.
Default Configuration
ip-address
If is not specified, information for all TACACS+ servers is displayed.
Command Mode
Privileged EXEC mode
tacacs-server timeout
]
30
51
1002