Area Stub No-Summary (Ospfv); Area Virtual-Link (Ospfv) - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Format
area <areaid> stub
Mode Router OSPFv3 Config
no area stub(OSPFv3)
This command deletes a stub area for the specified area ID.
Format
no area <areaid> stub
Mode Router OSPFv3 Config
area stub no-summary (OSPFv3)
This command disables the import of Summary LSAs for the stub area identified by <areaid>.
Default enabled
Format
area <areaid> stub no-summary
Mode Router OSPFv3 Config
no area stub no-summary(OSPFv3)
This command sets the Summary LSA import mode to the default for the stub area identified by
<areaid>.
Format
no area <areaid> stub summarylsa
Mode Router OSPFv3 Config
area virtual-link (OSPFv3)
This command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format
area <areaid> virtual-link <neighbor>
Mode Router OSPFv3 Config
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-42