Oil Supply & Cleaning Web Replacement - Gestetner A294 Service Manual

FUSING UNIT
6.9.4 OIL SUPPLY & CLEANING WEB REPLACEMENT
[C]
[A]
A294R511.WMF
A294R513.WMF
1. Remove the oil supply and cleaning web unit. (See Oil Supply And Cleaning
Web Unit Removal.)
2. Put the oil supply and cleaning web unit on a stable flat surface (opening side
up) as shown.
3. Remove the screw [A] from the oil supply and cleaning web unit cover.
4. Slide the oil supply and cleaning web assembly [B] to the rear while holding the
oil supply and cleaning web unit cover [C]. Then, remove the oil supply and
cleaning web assembly [B].
5. Remove two bushings [D] from the short shaft side (rear side).
6. Push the web collecting roller shaft [E] to the short shaft side (rear side). Then
remove the web collecting roller gear [F] and bushing [G].
7. Replace the oil supply and cleaning web [H] (1 gear and 1 bushing).
A294/A295
CÓPIA NÃO CONTROLADA
[B]
[D]
[H]
6-88
CÓPIA NÃO CONTROLADA
[E]
A294R512.WMF
[G]
[F]
[G]
[F]
SM