Scanner Motor - Gestetner A294 Service Manual

6.3.8 SCANNER MOTOR

[A]
A294R058.WMF
1. Remove the exposure glass. (See Exposure Glass.)
2. Remove the upper left cover. (See Exterior.)
3. Remove the front upper cover [A] (7 screws, 1 connector).
4. Loosen the screw [B] holding the belt tension bracket [C].
5. Remove the 3 screws [D] securing the scanner motor assembly [E].
6. Disconnect the two connectors [F] from the MCU.
7. While pushing down the bracket [C] to release belt tension, remove the scanner
motor assembly.
8. Remove the scanner motor from the bracket (3 screws) and replace it.
9. After reassembly, do the copy image adjustments.
SM
CÓPIA NÃO CONTROLADA
[B]
[C]
6-25
CÓPIA NÃO CONTROLADA
SCANNER UNIT
[E]
[F]
A294R016.WMF
[D]
A294/A295