Gestetner A294 Service Manual page 272

SERVICE PROGRAM MODE
Mode No.
(Class 1, 2 and 3)
5-804 Output Check
5-811 Machine Serial Number
1 Machine Serial
Number
3 ID 2 Code
5-812 Phone No. Setting for Servicing
1 Phone No. for
Servicing
2 Fax No. for
SMC Report
5-816 CSS Function (RDS Function)
5-821 CSS PI Device Code (RDS Function)
5-907 Plug and play
5-914 Printer Counter Display
5-915 Mechanical Counter Detection
5-917 GPC Counter
5-918 A3/DLT Counter Display
5-921 Optional Counter Output Port
SM
CÓPIA NÃO CONTROLADA
Turns on the electrical components
individually for test purposes.
See the "Output Check" section for details.
Displays the machine serial number. The
S number can be reinput using the number
keys.
This function is for Japanese machines
S
only.
Use this to input the telephone number of
the service representative (this is displayed
when a service call condition occurs.)
S
Press the "•" key to input a pause.
Press the "Clear modes" key to delete the
telephone number.
Use this to input the telephone number of
S the service representative. This number is
printed on the SMC print.
Japanese version only. Do not change
S
the setting.
Japanese version only. Do not change
S
the setting.
This SP mode is for designer use only.
Selects whether or not the total printer
S
counter is displayed in the UP mode.
Checks whether the mechanical counter
inside the inner cover is connected or not.
Japanese version only. Do not change
the setting.
Selects whether the A3/DLT counter is
S displayed in UP mode or when the "Total
Counter" key is pressed.
Selects whether the 4-pin key counter
connector is connected to an optional
counter like key card system, coin lock, etc.
S
4-50
CÓPIA NÃO CONTROLADA
Function
Rev. 9/2001
Settings
ON
OFF
0 ~ 4
0
Off
On
0: Not
detected
1: Detected
2: Unknown
0: Off
1: Key
Counter CN
A294/A295