Remaining Paper/ Paper End Detection - Trays 2 & 3 - Gestetner A294 Service Manual

2.8.5 REMAINING PAPER/PAPER END DETECTION – TRAYS 2 & 3
A294D607.WMF
Remaining Paper Detection
The lift motor [A] rotates when the tray is pushed in. The machine's CPU detects
the remaining paper by monitoring the lift motor rotation angle (4 levels).
End Detection
If there is paper in the tray, the paper stack lifts the paper end feeler [B] and the
paper end sensor [C] is deactivated. When the paper tray runs out of paper, the
paper end feeler drops into the cutout [D] in the tray bottom plate and the paper
end sensor is activated.
SM
CÓPIA NÃO CONTROLADA
[D]
2-79
CÓPIA NÃO CONTROLADA
[A]
[B]
A294D608.WMF
PAPER FEED
[C]
A294/A295