Gestetner A294 Service Manual page 274

SERVICE PROGRAM MODE
Mode No.
(Class 1, 2 and 3)
5-967 Copy Server: Disable Function
5-968 Delete All the Stored Files in CD
5-970 Printer Installed
5-990 SMC Print
1 All
2 SP
3 User Program
4 Logged Data
6-006 DF Registration Adjustment
1 Side-to-Side
Leading Edge
2
(Thin Original)
3 Leading Edge
(Duplex-1st)
4 Leading Edge
(Duplex-2nd)
6-007 ADF Input Check
1 Group 1
2 Group 2
3 Group 3
SM
CÓPIA NÃO CONTROLADA
If "1" is selected, the copy server function is
disabled.
S
Turn the main switch off and on after
changing the setting.
Deletes all the copy server files stored in
the CD currently in the CD-RW.
S
Prints all the system parameter lists.
See the "System Parameter and Data Lists"
section for how to print the lists.
Prints the SP mode data list.
See the "System Parameter and Data Lists"
section for how to print the lists.
Prints the UP mode data list.
See the "System Parameter and Data Lists"
section for how to print the lists.
Prints the machine status history data list.
See the "System Parameter and Data Lists"
section for how to print the lists.
Adjusts the printing side-to-side registration
in the ADF mode.
B
Use the "•" key to toggle between + and –.
Adjusts the original stop position.
B Use the "•" key to toggle between + and –.
Adjusts the original stop position against
the original left scale in one-sided original
B
mode.
Use the "•" key to toggle between + and –.
Adjusts the original stop position against
the original left scale in two-sided original
B
mode.
Use the "•" key to toggle between + and –.
Displays the signals received from sensors
and switches of the ADF.
See the "Input Check" section for details.
Displays the signals received from sensors
and switches of the ADF.
See the "Input Check" section for details.
Displays the signals received from sensors
and switches of the ADF.
See the "Input Check" section for details.
4-52
CÓPIA NÃO CONTROLADA
Function
Rev. 9/2001
Settings
0: Normal
1: Disable
copy server
0: No
1: Yes
Start
Start
Start
Start
–3 ~ +3
0.1 mm/step
+0.0 mm
–10 ~ +10
0.13 mm/step
+0.0 mm
–29 ~ +29
0.13 mm/step
+0.0 mm
–29 ~ +29
0.13 mm/step
+0.0 mm
A294/A295