Gestetner A294 Service Manual page 142

PAPER FEED
Guide Plate Release
[B]
[F]
[G]
When a paper misfeed occurs between the vertical transport rollers and the
registration rollers, the lower paper guide plate [A] automatically opens.
When the registration sensor is not activated at a certain jam check timing, the
guide plate solenoid [B] turns on. The lever [C] raises the lock lever [D] on the
guide plate to release it from the pin [E] on the rear side frame. Then the guide
plate falls open.
The actuator [F] on the guide plate activates the guide plate position sensor [G]
when the guide plate opens.
The user must close this guide plate manually after removing the jam, To prevent
the guide plate from being left open, if the guide plate position sensor is activated,
copying is disabled and a caution is displayed on the LCD panel.
A294/A295
CÓPIA NÃO CONTROLADA
[A]
2-92
CÓPIA NÃO CONTROLADA
[C]
[D]
[E]
A294D597.WMF
SM